Gina Kramer
Food Safety Think Tank

Activate Your Listeria Mitigation and Control Program

By Gina R. Nicholson-Kramer, Jeff Mitchell
No Comments
Gina Kramer

Preventing Listeria contamination of food products must be conducted at all levels of production.

Listeria: It has been in the news and in our food throughout the past year. It has cost companies millions of dollars in recalls, shutdowns and mitigation; it has cost the government thousands of dollars in outbreak investigation, inspection and follow-up; and it has cost millions of dollars in medical bills for victims and for some, it has cost their lives.

I have asked Jeff Mitchell, vice president of food safety at Chemstar, to share his knowledge about Listeria mitigation and control, and to talk about the research that supports the innovative program that Chemstar uses with its customers.

Listeria Mitigation & Control Program

By Jeff Mitchell

Jeff Mitchell, Chemstar
Jeff Mitchell, Vice President of Food Safety, Chemstar

Thus far this year there have been several recalls of ready-to-eat (RTE) foods due to contamination with Listeria monocytogenes. Efforts to prevent contamination of food products with Listeria monocytogenes must be conducted at all levels of production. This is a difficult task given the fact that the bacteria is so widespread in the environment.  Focusing efforts in your process where contamination risk is of greatest concern to the consumer is important.  There is solid evidence that commercially prepared foods that have been contaminated with Listeria monocytogenes has occurred after the food product has been subjected to an initial lethality treatment. The product may be exposed in this area as a result of slicing, peeling, packing, re-bagging, cooling, or other procedures that may expose the product to potential contamination.

Listeria monocytogenes survives extremely well in food processing and retail food preparation environments. It may be introduced into your facility through a variety of routes, including:

  • Raw materials
  • Employees’ shoes or clothes
  • Equipment (boxes, crates, carts)

Controlling traffic flow into critical areas of the process can help reduce the chances of introducing and spreading the organism.

Once Listeria is introduced into the nonsterile environment, retail and factory conditions that promote its growth increase the risk of post-processing contamination. Several factors, including moisture, nutrients, temperature, competitive microflora and pH, affect the growth of Listeria in the food preparation and processing environment.  Moisture is the most crucial factor, as it is essential for microbial growth and is the most easily controlled of the factors.

Listeria tends to form a biofilm to enhance its survival when resident populations become established in the food prep/processing environment. The resident populations that are referred to as “persistent” are not easily eliminated by general cleaning and sanitizing procedures. Biofilm penetration is necessary for removal and inactivation of Listeria. The correct blend of chemical, contact time and agitation will aid in the removal. This combination dissolves the biofilm and the organic material to which it adheres, allowing the sanitizer to inactivate the released, sensitive cells.

 To learn more about Listeria from Gina and Jeff, check out their archived webinar with Food Safety Tech, Preventing Listeria Contamination: A Practical Guide to Food Safety ControlsBiofilm removal is important, because persistent L. monocytogenes can be dispersed from a biofilm into the environment and onto food processing equipment, and non-food contact and food-contact surfaces. Passive dispersal of Listeria can occur by aerosolization from high-pressure hoses or brushing; once aerosolized, Listeria can contaminate other growth niches in the food handling/processing area, eventually contaminating food contact surfaces and food. Another form of passive dispersal is the movement of processing equipment. If a biofilm is present, cells can be released by the movement or vibration of the equipment.

Inactivation of L. monocytogenes in biofilms is an important part of a Listeria control program. Understanding this face prompted our team to perform research with the University of Georgia using a mixed culture biofilm formed by Pseudomonas putida and L. monocytogenes to evaluate the ability of Chemstar’s foaming sanitizer to inactivate L. monocytogenes present in biofilms under realistic use conditions. The results revealed that it provides for a greater than four-log reduction.1

Identifying Listeria in the environment and eliminating the resident populations can reduce the risk of secondary contamination. Once these procedures are established, employee training and environmental monitoring are vital.  An effective Listeria control program requires that employees understand their role in mitigating the spread of Listeria, and management must relay those expectations. Control strategies are not likely to be effective if employees won’t cooperate, or don’t understand what they are expected to do, or why it is important, and that expected procedures or behavior will be monitored.

Reference

  1. Frank, J. and Mitchell, J. (December 3, 2010).  Evaluation of Chemstar foaming sanitizer for inactivating Listeria monocytogene in floor drain biofilms.
Join us for the Listeria Mitigation and Control Workshop at the Food Safety Consortium in Schaumburg, IL on November 17, 2015. Learn about the Five Key Elements in building an effective Listeria Control Program:

  1. Specific Sanitation Controls for Listeria
  2. Training of Personnel (they need to understand their role in the program)
  3. Traffic Control
  4. Targeted Environmental Monitoring and Testing
  5. Control Water Introduced into the Process Environment

The workshop will be a hands-on approach to learning about Listeria and practical solutions to take back and implement into your company’s sanitation program.

About The Author

Gina Kramer

About The Author

Jeff Mitchell
Vice President of Food Safety

Jeff Mitchell is the vice president of food safety at Chemstar, where he is responsible for all operational and strategic initiatives related to food safety and sanitation. He brings more than 20 years of experience in food safety and sanitation with the United States Department of Defense, where he most recently served as a Command Food Safety Officer. Mitchell has worked closely with the USDA and the FDA regarding food safety policy, HACCP and regulatory reform. In recognition of his contributions to food safety, Mitchell was awarded the Defense Meritorious Service Medal, among other awards, and is recognized by industry as a source of food safety and sanitation expertise.

Mitchell earned a Bachelor of Food Science and the degree of Master of Food Science & Technology from the University of Georgia. His professional certifications include Food Defense Coordinator, HACCP Coordinator/Instructor, ISO 2200 Lead Auditor, SQF Practitioner, and he has completed the DOD’s Senior Officer Staff Course.

Leave a Reply

Your email address will not be published. Required fields are marked *

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.