Tag Archives: coronavirus

Coronavirus, COVID-19

“Uncontrolled COVID-19 Cases”: Foster Farms Temporarily Shuts Down Plant Following Eight Worker Deaths

By Food Safety Tech Staff
No Comments
Coronavirus, COVID-19

The 2020 Food Safety Consortium Virtual Conference Series will discuss COVID-19 Lessons Learned and Worker Safety | The Event runs September 3 through December 17 | Register NowA poultry processing plant operated by Foster Farms must shut down per the Merced County Department of Public Health (California) as a result of a large COVID-19 outbreak that has resulted in the death of eight employees. At least 358 workers at the facility located in Livingston, California have tested positive for COVID-19 (an outbreak was officially declared on June 29). Several buildings make up the Livingston facility, which employs about 2600 workers.

“In view of increasing deaths and uncontrolled COVID-19 cases, the decision was made to order the Livingston Plant within the Foster Farms Livingston Complex closed until acceptable safety measures are in place,” said Dr. Salvador Sandoval, Merced County’s Public Health Officer. In addition, the Los Angeles Times reports that officials are concerned the outbreak could be worse than reported because universal worker testing has not been completed.

The plant will reportedly close until September 7. During the closure, the facility will be deep cleaned and employees will engage in a new round of testing. Merced County states that an employee cannot return to work until he or she receives two negative COVID-19 test results within seven days.

Shawna Wagner, DNV GL
FST Soapbox

Pandemics and Your Business Continuity Plan

By Shawna Wagner
2 Comments
Shawna Wagner, DNV GL

Who would have even thought to put the topic of a pandemic in your business continuity plan? I know, I sure never thought of it, even as a senior auditor. I think that most of us are familiar with the typical subjects of tornados, floods, power outages and disgruntled employees, to name a few. We now need to focus on adding a pandemic to the to-do list of your plan, as this global issue has become a reality since early 2020.

It is quite likely that your plant has been affected by COVID-19 in some way, therefore your site has put into place actions to mitigate the risks posed by the pandemic. What may not be likely, is that any of these actions have been documented. I have currently seen plants evolve actions based on the severity of the pandemic in their locations. Travel restrictions, reduced work force, changing employee personal protective equipment, additional employee monitoring, and remote work environments are some of the examples directly affecting sites that I have witnessed during the first half of this year. As plants learn and experience more issues, they tend to adapt to how they are mitigating the risks in their facilities.

Capturing what actions went smoothly and what has gone astray will aid in strengthening your business continuity plan. Pandemics as well as other extraordinary events are handled by a multi-step approach that needs organization and good communication. That is why it is imperative to build and document actions, then verify how those steps are to be used. Involving key personnel–not just the quality manager–at the site is a best practice in getting a full grasp on what needs to happen during an emergency. In several instances, I have witnessed that key personnel are not informed about where a site’s business continuity plan is located; or the plan was updated right before an audit and after goes back on the shelf for the next 12 months, collecting dust. Employees should be trained on the contents of the plan, their responsibilities (if they are part of the business continuity team), current contacts, updates, and ways to initiate proper channels, if or when a time comes to do so. Hopefully, it never does, but it sure does not hurt to be prepared.

The business continuity plan is not a “one-size-fits-all” approach for plants. An important consideration, when defining what actions to take, if your area has been plagued by a pandemic includes determining what risks are brought by employees, visitors (i.e., contractors), location, and type of product being produced. Plant A making a high-risk open product may implement additional hand washing and sanitation, whereas Plant B making a low-risk closed product may implement additional health screening (i.e., temperature checks) for employees. You should ensure that it makes sense, and it is beneficial for your site and your interested parties, such as customers, consumers and stakeholders.

Your business continuity plan should be built to be a great resource to you in the time of need. And in return, you will have to put some elbow grease into shaping the document in a way that fits the ever-changing food environment. Keeping your plant current will assist your business to quickly respond to a negative event. In consequence, not having a plan that works for your site, or any at all, could lead to closed doors.

Pratik Soni, Omnichain
Retail Food Safety Forum

Top Three Visibility Challenges in Today’s Food Supply Chain

By Pratik Soni
No Comments
Pratik Soni, Omnichain

To say that COVID-19 has been disruptive would be putting it mildly. The pandemic’s sudden and seismic impact has brought major upheaval across industries—the food industry and its supply chain included.

There was the initial panic buying that drove upticks in consumer demand for which few manufacturers and grocers were prepared, resulting in widespread product shortages. With restaurants closed, distributors and suppliers were left with considerable excess inventory—most of which ended up as waste and losses. Inside production sites and plants, many had to try and maintain their output with a reduced workforce, even as demand continued to climb. Meanwhile, some plants unfortunately have had to shut down operations on account of employees testing positive for COVID-19.

In the time since the outbreak, the food supply chain has stabilized to an extent. Store shelves are continuously being replenished with products. Restaurants have started reopening with new health and safety measures. Yet even as the industry takes gradual steps toward recovery, the underlying problem that led to the magnitude of COVID-19’s impact persists: Lack of visibility. There was lack of visibility into supply and demand and what was happening upstream and downstream across the supply chain, which prevented timely, proactive action to optimize operations in face of disruption.

Looking ahead, participants across the food supply chain will need enhanced end-to-end visibility so that they can work together to get ahead of the curve. As part of gaining this visibility, they will need the transparent exchange of information and cohesive collaboration to adapt especially as the food industry continues to see shifts in consumer behavior and the marketplace in the wake of COVID-19—particularly in the following three key areas.

Food Distribution

While food producers have been working tirelessly to keep grocery store shelves and restaurant kitchens well stocked, there continues to be fluctuating availability on certain products, such as eggs, dairy, poultry and meat. This has led distributors and suppliers to increase their prices when selling these goods to stores and restaurants, who have had to then pass the additional costs on to consumers through their own price increases and surcharges, respectively. One report from CoBank, a cooperative bank part of the Farm Credit System, notes there could be as much as a 20% increase in the price of pork and beef this year due to supply issues.1 Many grocers have also implemented purchase limitations on consumers to combat shortages.

These downstream implications stem largely to uncertainty in the supply chain, with stores and restaurants unsure about available supply upstream and when they can expect to receive shipments. But if there was clearer visibility and transparency between production, distribution, transportation, food service and retail, then all parties could better anticipate and plan for supply shortages or delays. For instance, if a meat processing plant has to temporarily close due to cases of COVID-19, they can immediately communicate to the rest of the supply chain so that parties downstream can readily find alternative sources and minimize any necessary price inflations or other implications to consumers.

Consumer Demand

Even with the reopening of restaurants, people will likely choose to cook more of their meals at home. It was a trend that began with restaurant closures and will continue for the foreseeable future as consumers remain cautious of dining out. While this may bring tough times ahead for the food service industry, the grocery sector is seeing a huge lift in business. Research from restaurant management platform Crunchtime shows that, towards the end of June, restaurants were only seeing 64.5% of their pre-COVID-19 sales levels.2 At the same time, a study by Brick Meets Click and Mercatus reveals U.S. online grocery sales reached a record $7.2 billion in June, up nearly 10% over May.3

For food companies and brands, growth in the grocery sector has presented a challenge in the way of demand planning and forecasting. I’ve personally spoken with several company executives who have seen significant upticks in orders from their grocery channel partners—an increase for which they didn’t forecast—and are now struggling to adjust production levels accordingly to avoid the risk of excess production that would lead to unnecessary costs, wastes and losses. In such instances, real-time visibility into transactional activity and stock levels at the retail level would help production planners improve the accuracy of their forecasts and enable them to think steps ahead before orders come in and thereby optimally balance supply with demand. Stores would remain well stocked and the supply chain could flow in a more efficient and profitable way for all participants.

Food Handling

Without question, public health is the number one priority right now. Participants at each point in the food supply chain today need to communicate with each other, as well as to consumers, that they’re following best practices for social distancing, disinfecting and other precautions. It’s not to prevent the possible transfer of the virus via actual products, as the FDA notes there is currently no evidence of transmission through food or packaging. But rather, it’s to build greater confidence in the food supply chain—that everyone is doing their part to support individual and collective health and safety, which in turn prevents possible facility closures or other case-related bottlenecks that would inhibit consistent supply to the market.

There also has to be confidence that, amid these countermeasures for COVID-19, companies are still upholding their commitments to food safety, integrity and proper handling. What can support that confidence is data—shared data from every point in a product’s journey from source to shelf. The data should be transparent and available to all supply chain participants as well as immutable so that it is tamperproof and fully traceable should there be any problem, such as mislabeling or a foodborne illness. The data ultimately holds everyone accountable for their role in ensuring a safe food supply chain.

To achieve the level of visibility outlined above, the food industry will have to break away from legacy processes involving the siloed management of operational systems and databases. Instead, the disruption seen during COVID-19 and ongoing shifts in the marketplace should encourage companies to consider digital transformation and technologies that can enable a more cohesive and nimble food supply chain. These are technologies like blockchain, which provides a decentralized, distributed ledger to publish and share data in real time. Moreover, artificial intelligence that can leverage incoming real-time data to guide next-best actions, even when the unexpected occurs. Personally, I always return to the notion that the supply chain is a team sport. You need visibility to know what each team member is doing on the field and how to align everyone on a gameplay. The digital solutions available today offer that visibility and insight, as well as the agility to pivot as needed to obstacles along the journey from source to shelf.

References

  1. Taylor, K. (May 6, 2020). “The American meat shortage is pushing prices to unprecedented heights — here’s how it could affect your grocery bill.” Business Insider.
  2. Maze, J. (July 7, 2020). “As the coronavirus resurges, restaurant sales start slowing again.” Restaurant Business.
  3. Perez, S. (July 6, 2020). “US online grocery sales hit record $7.2 billion in June.” TechCrunch.
Trish Wester
FST Soapbox

FDA Announces Inspections Will Resume…Sort Of

By Trish Wester
No Comments
Trish Wester

FDA Commissioner Stephen Hahn, M.D. recently announced that food safety inspections will resume in July, but inspectors will be given leeway to accommodate the coronavirus pandemic. Inspections will be prearranged by appointments. The agency suspended routine inspections in late March as a result of the pandemic response, which closed down much of the country.

USDA/FSIS has continued to provide inspection services for eggs, meat and poultry throughout the COVID-19 outbreak, with a significant number of establishments involved in outbreak clusters and periodic shutdowns.

The “White House Guidelines for Opening Up America Again” calls for the FDA to send out investigators for on-site inspections by the week of July 20, using the COVID-19 Advisory Rating system, which utilizes state and national data about infection rates to determine the regions where enforcement can resume.

In a July 10 FDA statement Hahn noted, “resuming prioritized domestic inspections will depend on the data about the virus’ trajectory in a given state and locality, and the rules and guidelines that are put in place by state and local governments.”

One of the most significant modifications for domestic inspections in the announcement is that they will be pre-announced to FDA-regulated businesses. “This will help assure the safety of the investigator and the firm’s employees, providing the safest possible environment to accomplish our regulatory activities, while also ensuring the appropriate staff is on-site to assist FDA staff with inspection activities,” Hahn said. Previously, most inspections were unannounced.

It’s not entirely clear how FDA will use the White House guidelines to determine where they can schedule inspections. There is mention of a prioritization mechanism that will identify high-risk operations, but that has traditionally been part of FDA’s approach to inspections.

The CDC published phased guidelines for states to follow in reopening, which are referred to in the announcement. The guidelines document outlines the gating criteria for states, but published versions do not mention inspection requirements. Many states began reopening without meeting all of the gateway criteria for Phase 1, and continued to accelerate reopening activities in a way that makes it unclear which phase criteria they may have actually met when compared to the phase under which they claim to be operating.

Further complicating the safety issue is the recent rising number of COVID-19 cases that is causing some states to pause or rollback reopening activities. Since publishing the announcement, several states have emerged as new COVID-19 hot spots, including Texas, Arizona and Florida; In addition, Florida has surpassed New York in total cases. California, another food producing state heavily affected by the pandemic, is seeing a significant increase in cases and is considering issuing new shelter-in-place orders. It was recently reported that CDC has identified 21 states as “Red Zones”, with at least 11 states on the verge of surging cases.

In other words, with the virus on the rise, there may not be a significant number of inspections actually performed, regardless of whether or not inspections have technically resumed, simply because there just isn’t a safe way to send inspectors out.

The FDA has also published the “New Era of Smarter Food Safety Blueprint”, which includes ways the agency could use technology to support compliance activities. There may be an opportunity for the FDA to implement new tools such as remote verification in lieu of onsite inspections, but that remains to be seen. Among such tools, remote audit pilots were recently completed and those results will be available for public presentation at the end of August.

In the short term, should FDA determine you are an inspection candidate, you will contacted in advance to schedule a day and time.

Jennifer van de Ligt, Food Protection and Defense Institute, University of Minnesota

Q&A: Pandemic Puts Worker Health & Safety, Leadership Skills and Business Adaptability at Forefront

By Maria Fontanazza
No Comments
Jennifer van de Ligt, Food Protection and Defense Institute, University of Minnesota

Issues with the health of frontline workers, supply chain disruptions, and changes in consumer behavior are just a few vulnerabilities that the food industry is experiencing as a result of COVID-19. Food Safety Tech recently had a conversation with Jennifer van de Ligt, Ph.D., director of the University of Minnesota Integrated Food Systems Leadership Program and Food Protection and Defense Institute about the hurdles that the industry is experiencing and where we go from here.

Food Safety Tech: What challenges is the food system facing in light of the COVID-19 pandemic? Where are the vulnerabilities?

Jennifer van de Ligt, Ph.D.: The food system is facing primary, secondary and tertiary challenges right now. I see two main drivers as disruptors as a result of COVID-19. The health and safety of employees is the first primary driver. As COVID-19 has more broadly spread through the U.S., ensuring the health and safety of employees in the food system has become essential; however, the pandemic has shown us the food system has struggled with that.

The other big primary challenge facing the food system has been the swift change in consumer behavior. Pre-COVID-19, nearly half of food was consumed away from home. When restaurants closed, and stay-at-home orders were in place, it put extreme amounts of pressure on our food retail segment, causing supply and demand issues.

Regarding the health and safety of employees: We’ve seen meat processing struggle with production demands because the health of their employees has been impacted by the virus. In mid-April, the beef and pork capacity in this country went down by over 40%. They are making great improvements and are approaching normal harvest capacity range for both [beef and pork production]. Meat cuts being produced are slightly different than normal, as this part of the meat plants are very labor intensive. This has really highlighted the need to make sure that we keep the health and safety of our food system employees front and center.

During the 2020 Food Safety Consortium Virtual Conference Series, Jennifer Van de Ligt will participate in a panel discussion on November 5 about Professional Development and Women in Food Safety | Register Now Now that the meat supply chain is beginning to recover, we’re also beginning to see increasing effects on non-meat supply manufacturing. This isn’t isolated to food manufacturing; as we experience broader community spread, COVID-19 will impact all aspects of our food system.

On consumer behavior: As consumers shifted to food retail, immense pressure was quickly put on our food supply chain logistics, manufacturing timing and processes, the speed to warehouses and delivery, etc.

One example that demonstrates a challenge in manufacturing and consumer demand is the difference in volumes for food services versus retail. I like to use the example of shredded cheese. At a grocery store, you’ll find a one-pound pack, but shredded cheese in food service might be in a 10-pound bag. There are not a lot of consumers who want to buy a 10-pound bag of shredded cheese. Well, why can’t cheese manufacturers just package bulk product into one-pound packs? There are several reasons that don’t allow producers to pivot quickly: They may not have the machinery or packaging to do that. Also, changing packaging from food service to retail requires different labels and regulatory approvals. Examples like this led to many of the spot outages consumers found in grocery stores. In the produce sector, it led to produce being plowed under in fields because they didn’t have the distribution channels to go into retail instead of into food service.

In the Integrated Food System Leadership (IFSL) program, we’ve recently discussed food equity and food injustice as a result of COVID-19. As food retail became stressed and unemployment increased, we saw a huge demand for our food assistance networks. Because food retail is one of the primary contributors to the food assistance networks, there wasn’t enough volume being donated. In addition, food service foods are not appropriately packaged to go into the food assistance networks and food banks, similar to the issue in moving to food retail. This led to tremendous pressure and innovative solutions to source and distribute food to a newly vulnerable population.

As we look ahead into the coming months, many of the vulnerabilities in the food system will be the same. We have to continuously monitor the health and safety of our employees to keep our food system as a whole functional. There’s a growing recognition that our primary agriculture workers are also at risk—the people in fields harvesting and planting. There are many groups providing recommendations on how to protect agriculture employees and communities where they work and reside.

We’ll see continued adaptation in the food system to the new reality of how restaurants and food service engage with their consumers with the shift in behavior to limited restaurant dining and increases in online ordering.

FST: In what areas do food manufacturers, processors or growers need to adapt moving forward in order to thrive?

Van de Ligt: There are several. First, I think this crisis has really brought worker health and welfare to the forefront, and there will be more emphasis on the essentiality of food system workers. They were previously a behind-the-scenes workforce. The issue of worker health and welfare is going to accelerate in many industries, but I also see a push to more automation. The human workforce is necessary, and people do a really wonderful job, but are there areas that might benefit from automation? I think those go hand in hand.

I also think the global food system needs to rethink how it remains resilient. In the past, there’s been a focus on resilience and efficiency through economy of scale. That still exists and may look different moving forward. Using the meat industry as an example, that economy of scale was also its biggest weakness that had gone unrecognized. Going forward, I think there are many companies that are going to consider alternative supply chains. Should multiple, smaller plants be utilized instead of one large plant to provide a more resilient framework for production? Other companies are going to think about installing equipment or processing lines that could more quickly pivot between food service and food retail. There’s also a huge opportunity now for local and smaller markets to really make an impact as people look for alternative supply chains and sources. We found that many of the local food markets and co-ops, especially those that provided into food service, pivoted pretty quickly to pop-up online marketplaces to provide food direct to consumer. I think we’ll see that trend increase as well.

In order to feed billions of people worldwide, it’s essential that the food industry take a broader systems approach versus the siloed approach path we’ve been using. The pandemic has highlighted how the food system is an intricately functioning balance and requires collaboration. Our food system will only be able to move forward faster with less disruption when we have food system leaders who understand the intricacies and the ripple effects of the challenges we face. Leaders who understand the impacts of decisions outside of their sphere will be essential to plan for impacts from natural disasters, another pandemic, etc.—and to create a more responsive and resilient food system in the future.

FST: Where does this leave folks who are either beginning or rising in their careers in food safety? Do you think the pandemic has changed food safety careers as they’ve historically functioned?

Van de Ligt: I like to say that ‘what got us here is not going to get us there.’ In general, if you think about where food safety careers have been in the past, the roles have been all about consistency, understanding regulations, making sure we do everything precisely right all of the time so we don’t have a food safety outbreak.

The focus on doing things precisely right all of the time will absolutely continue. What I think will shift is the need for food safety professionals to think more broadly than just the regulations that are required for compliance. Food safety professionals need to understand more about the system that is happening outside their facility; the impact of their work going backwards and forwards in the supply chain.

How things have worked historically in a food safety role has been having a consistent supplier network that provides the same type of product every time; you know what to expect, how to produce and distribute safe food for the customers you serve. In a situation like COVID-19, because of the disruptions from farm to fork, the suppliers you need to work with may be different and you need to quickly make decisions spontaneously as supply shifts. Having the knowledge and skills to navigate changes is essential to ensure the quality and safety of your product.

A highly technical focus that many professionals have when they start their career is often too narrow and won’t be enough for emerging food system leaders. Leadership skills are vital as well. In the IFSL program we teach food system professionals how to explore proactive viewpoints, not just managing people or responsibilities. Managers make sure things are done things correctly; leaders make sure we do the right thing. In order to learn how to do the right thing, we teach skills and tools on how to navigate uncertainty; practicing active listening, constructive feedback; and understanding the concerns of a supplier or customer are examples.

We emphasize and teach in the IFSL program that food system professionals and leaders need to be much more proactive. This means equipping them with the food system knowledge and leadership skills so they can predict and prepare for how decisions affect upstream and downstream. Having a broader viewpoint is critical to adaptivity, which will build resilience and help limit disruption.

Coronavirus, COVID-19

Meatpacking Workers Sue OSHA Over Hazardous Working Conditions During COVID-19 Pandemic

By Food Safety Tech Staff
No Comments
Coronavirus, COVID-19

View the complimentary webinar, “Instant Replay & Update: Is Your Plant COVID-19 Safe?”A lawsuit filed yesterday against OSHA alleges that the agency did not protect meat packing plant workers during the COVID-19 pandemic. Three workers from Pennsylvania-based Maid-Rite Specialty Foods are suing OSHA for putting workers in “imminent danger” as a result of hazardous working conditions, according to The Washington Post. The lawsuit stated that Maid-Rite did not:

  • Implement social distancing measures on the processing lines
  • Provide acceptable personal protective equipment
  • Address sick workers safely by not separating them
  • Tell all workers who may have been in close contact with sick workers

Maid Rite is also accused of incentivizing sick employees to report to work with bonuses.

Both OSHA and Maid Rite have not yet commented on the lawsuit as of yet.

For months, COVID-19 outbreaks at meat and poultry processing plants have been a problem, with more than 11,000 infections being reported.

During the 2020 Food Safety Consortium Virtual Conference Series, experts will address The Intersection of OSHA and Food Safety Personnel during the episode, COVID-19’s Impact on Food Safety Management. This session will occur on Thursday, November 12. Learn more.

Food Safety Consortium

2020 Food Safety Consortium Virtual Conference Series Agenda Announced

By Food Safety Tech Staff
No Comments
Food Safety Consortium

The agenda for the 2020 Food Safety Consortium Virtual Conference Series has been released. The announcement about the annual Food Safety Consortium being converted to a virtual series due to the COVID-19 pandemic was made last month. Due to a demand to provide attendees with even more content, the event has been extended a full month and is running into December. Food Safety Tech is the media sponsor.

The event will begin every Thursday at 12 pm ET, beginning on September 3 and continue through December 17. Each week will feature three educational presentations, two Tech Talks, and a panel discussion. Weekly episodes include food defense, food labs, pest management, sanitation, food fraud, listeria detection, mitigation & control, professional development, women in food safety, supply chain management, COVID-19’s impact and food safety culture.

Frank Yiannas, FDA deputy commissioner for food policy and response, will serve as the keynote speaker on Thursday, October 1 at 12 pm ET.

“Human connection is so important for events, and we know we’re not the only game in town. That’s why we’ve invested in a Conference Virtual Platform that can facilitate discussions, discovery, and connection that can continue whether our event is offline or online—and not end with the live streaming,” says Rick Biros, president of Innovative Publishing and director of the Food Safety Consortium. “Simply, the experience other food safety conferences are offering is not conducive to learning, staying engaged or take into consideration that you have a job to do during that week. This is why we have designed the Consortium’s program with short, manageable episodes that are highly educational.”

Registration for the 2020 Food Safety Consortium Virtual Conference Series is open. Keeping in mind that registrants may not be able to attend every week due to scheduling conflicts, there is an option to watch the each session on demand.

Tech Talk Sponsorship

Companies that are interested in sponsoring a 10-minute technical presentation during the series can also submit their abstract through the portal. For pricing information, contact IPC Sales Director RJ Palermo.

Innovative Publishing has also converted the Cannabis Quality Conference to a virtual event. More information is available at Cannabis Industry Journal.

About Food Safety Tech

Food Safety Tech publishes news, technology, trends, regulations, and expert opinions on food safety, food quality, food business and food sustainability. We also offer educational, career advancement and networking opportunities to the global food industry. This information exchange is facilitated through ePublishing, digital and live events.

About the Food Safety Consortium Conference and Expo (The live event)

Food companies are concerned about protecting their customers, their brands and their own company’s financial bottom line. The term “Food Protection” requires a company-wide culture that incorporates food safety, food integrity and food defense into the company’s Food Protection strategy.

The Food Safety Consortium is an educational and networking event for Food Protection that has food safety, food integrity and food defense as the foundation of the educational content of the program. With a unique focus on science, technology and compliance, the “Consortium” enables attendees to engage in conversations that are critical for advancing careers and organizations alike. Delegates visit with exhibitors to learn about cutting-edge solutions, explore three high-level educational tracks for learning valuable industry trends, and network with industry executives to find solutions to improve quality, efficiency and cost effectiveness in the evolving food industry.

Shub Degupta, Mesh Intelligence
FST Soapbox

Driven by COVID-19 Disruptions to Find a Better, Data-Driven Way to Manage Food Supply Chain Risk

By Shub Degupta
No Comments
Shub Degupta, Mesh Intelligence

The COVID-19 pandemic emphatically laid bare the supply chain and supplier vulnerabilities that we face in our increasingly global food supply chains. Last month my company, Mesh Intelligence, convened a group of 14 leading supply chain, risk, sourcing and food safety executives drawn from some of the largest and most innovative food companies around the globe and in all aspects of the supply chain—from manufacturing, importing, distribution, logistics and retail. They volunteered their time to explore new solutions to better manage risk in their global food supply chains and are working together to develop and guide a lasting solution to address the challenges they faced across the past few months and manage supply chain in a more uncertain environment.

Zeroing In on the Need for Practical Solutions to Address Critical Issues

The group discussed how the tools and processes they currently use to manage supply chains are inadequate in identifying the scale, scope and intensity of new issues that arose during the pandemic and, more importantly, how these solutions need to be augmented in the future. To zero in on practical solutions, this group focused on the most critical challenges to address; understanding the best practices to tackle these issues; and guiding the development of data driven, practical and scalable solutions to predict risk.

Key insights from the group discussion include:

  1. The need for early, actionable warning on risk. Food organizations are seeking actionable, early warning signals about upcoming supply chain issues. Risk alerts, if they do exist, currently tend to be disaggregated and dispersed within an organization and executives struggle to understand the full picture.
  2. The need to communicate risk across the organization and the supply chain. Executives are seeking ways to communicate forecasted risk in fact-based and data-driven ways across key stakeholders within and outside the organization. There was clear interest in ways to engage suppliers and parties up and down the supply chain.
  3. Focusing on the most important risks and scenario planning a workable approach. Organizations are seeking ways to future proof their supply chains and increase resilience. By ensuring that their strategies are tested to withstand likely scenarios and situations, organizations improve their ability to work under increased uncertainty.
  4. The ability to continuously monitor and vet suppliers, even in a remote setting. Organizations are looking to get ahead of supplier issues and are seeking ways to work with suppliers to continuously monitor, vet and manage issues as they arise. This requires increased transparency and greater communication across parties in the supply chain.

Participants of the group are also getting early access to the solution and data to support them in their food safety and supply chain risk management efforts. The group will continue to meet on over the next few months to continue to guide the development of a food supply chain risk management solution. We look forward to keeping you updated. If you have insights on this issue, we encourage you to reach out. If you are interested in learning more about us or joining the group, please contact us at nicole@meshintel.com

Are Traasdahl, Crisp
FST Soapbox

How a History of Slow Technology Adoption Across Food Supply Chains Nearly Broke Us

By Are Traasdahl
1 Comment
Are Traasdahl, Crisp

The COVID-19 crisis has exacerbated existing disconnects between food supply and demand. While some may be noticing these issues on a broader scale for the first time, the reality is that there have been challenges in our food supply chains for decades. A lack of accurate data and information sharing is the core of the problem and had greater impact due to the pandemic. Outdated technologies are preventing advancements and efficiencies, resulting in the paradox of mounting food insecurity and food waste.

To bridge this disconnect, the food industry needs to implement innovative AI and machine learning technologies to prevent shortages, overages and waste as COVID-19 subsides. Solutions that enable data sharing and collaboration are essential to build more resilient food supply chains for the future.

Data-sharing technologies that can help alleviate these problems have been under development for decades, but food supply chains have been slow to innovate compared to other industries. By reviewing the top four data-sharing technologies used in food industry and the year they were introduced to food supply chains, it’s evident that the pace of technology innovation and adoption needs to accelerate to advance the industry.

A History of Technology Adoption in the Food Industry

The Barcode – 19741
We’re all familiar with the barcode—that assemblage of lines translated into numbers and letters conveying information about a product. When a cashier scans a barcode, the correct price pops up on the POS, and the sale data is recorded for inventory management. Barcodes are inexpensive and easy to implement. However, they only provide basic information, such as a product’s name, type, and price. Also, while you can glean information from a barcode, you can’t change it or add information to it. In addition, barcodes only group products by category—as opposed to radio-frequency identification (RFID), which provides a different code for every single item.

EDI First Multi-Industry Standards – 19812
Electronic data interchange (EDI) is just what it sounds like—the concept of sharing information electronically instead of on paper. Since EDI standardizes documents and the way they’re transferred, communication between business partners along the supply chain is easier, more efficient, and human error is reduced. To share information via EDI, however, software is required. This software can be challenging for businesses to implement and requires IT expertise to handle updates and maintenance.

RFID in the Food Supply Chain – 20033
RFID and RFID tags are encoded with information that can be transmitted to a reader device via radio waves, allowing businesses to identify and track products and assets. The reader device translates the radio waves into usable data, which then lands in a database for tracking and analysis.

RFID tags hold a lot more data than barcodes—and data is accessible in remote locations and easily shared along the supply chain to boost transparency and trust. Unlike barcode scanners, which need a direct line of sight to a code, RFID readers can read multiple tags at once from any direction. Businesses can use RFID to track products from producer to supplier to retailer in real time.

In 2003, Walmart rolled out a pilot program requiring 100 of its suppliers to use RFID technology by 2005.3 However, the retail giant wasn’t able to scale up the program. While prices have dropped from 35–40 cents during Walmart’s pilot to just 5 cents each as of 2018, RFID tags are still more expensive than barcodes.4 They can also be harder to implement and configure. Since active tags have such a long reach, businesses also need to ensure that scammers can’t intercept sensitive data.

Blockchain – 20175
A blockchain is a digital ledger of blocks (records) used to record data across multiple transactions. Changes are recorded in real-time, making the history unfalsifiable and transparent. Along the food supply chain, users can tag food, materials, compliance certificates and more with a set of information that’s recorded on the blockchain. Partners can easily follow the item through the physical supply chain, and new information is recorded in real-time.

Blockchain is more secure and transparent, less vulnerable to fraud, and more scalable than technologies like RFID. When paired with embedded sensors and RFID tags, the tech offers easier record-keeping and better provenance tracking, so it can address and help solve traceability problems. Blockchain boosts trust by reducing food falsification and decreasing delays in the supply chain.6

On the negative side, the cost of transaction processing with blockchain is high. Not to mention, the technology is confusing to many, which hinders adoption. Finally, while more transparency is good news, there’s such a thing as too much transparency; there needs to be a balance, so competitors don’t have too much access to sensitive data.

Cloud-Based Demand Forecasting – 2019 to present7
Cloud-based demand forecasting uses machine learning and AI to predict demand for various products at different points in the food supply chain. This technology leverages other technologies on this list to enhance communication across supply chain partners and improve the accuracy of demand forecasting, resulting in less waste and more profit for the food industry. It enables huge volumes of data to be used to predict demand, including past buying patterns, market changes, weather, events and holidays, social media input and more to create a more accurate picture of demand.

The alternative to cloud-based demand forecasting that is still in use today involves Excel or manual spreadsheets and lots of number crunching, which are time-intensive and prone to human error. This manual approach is not a sustainable process, but AI, machine learning and automation can step in to resolve these issues.

Obtaining real-time insights from a centralized, accurate and accessible data source enables food suppliers, brokers, distributors, brands and retailers to share information and be nimble, improving their ability to adjust supply in response to factors influencing demand.8 This, in turn, reduces cost, time and food waste, since brands can accurately predict how much to produce down to the individual SKU level, where to send it and even what factors might impact it along the way.

Speeding Up Adoption

As illustrated in Figure 1, the pace of technology change in the food industry has been slow compared to other industries, such as music and telecommunications. But we now have the tools, the data and the brainpower to create more resilient food supply chains.

Technology adoption, food industry
Figure 1. The pace of technology change in the food industry has been slow compared to other industries. Figure courtesy of Crisp.

Given the inherent connectivity of partners in the food supply chain, we now need to work together to connect information systems in ways that give us the insights needed to deliver exactly the rights foods to the right places, at the right time. This will not only improve consumer satisfaction but will also protect revenue and margins up and down food supply chains and reduce global waste.

References

  1. Weightman, G. (2015). The History of the Bar Code. Smithsonian Magazine.
  2. Locken, S. (2012). History of EDI Technology. EDI Alliance.
  3. Markoff, R, Seifert, R. (2019). RFID: Yesterday’s blockchain. International Institute for Management Development.
  4. Wollenhaupt, G. (2018). What’s next for RFID? Supply Chain Dive.
  5. Tran, S. (2019). IBM Food Trust: Cutting Through the Complexity of the World’s Food Supply with Blockchain. Blockchain News.
  6. Galvez, J, Mejuto, J.C., Simal-Gandara, J. (2018). Future Challenge on the use of blockchain for food traceability analysis. Science Direct.
  7. (2019). Crisp launches with $14.2 million to cut food waste using big data. Venture Beat.
  8. Dixie, G. (2005). The Impact of Supply and Demand. Marketing Extension Guide.