Tag Archives: COVID-19

Shub Degupta, Mesh Intelligence
FST Soapbox

Driven by COVID-19 Disruptions to Find a Better, Data-Driven Way to Manage Food Supply Chain Risk

By Shub Degupta
No Comments
Shub Degupta, Mesh Intelligence

The COVID-19 pandemic emphatically laid bare the supply chain and supplier vulnerabilities that we face in our increasingly global food supply chains. Last month my company, Mesh Intelligence, convened a group of 14 leading supply chain, risk, sourcing and food safety executives drawn from some of the largest and most innovative food companies around the globe and in all aspects of the supply chain—from manufacturing, importing, distribution, logistics and retail. They volunteered their time to explore new solutions to better manage risk in their global food supply chains and are working together to develop and guide a lasting solution to address the challenges they faced across the past few months and manage supply chain in a more uncertain environment.

Zeroing In on the Need for Practical Solutions to Address Critical Issues

The group discussed how the tools and processes they currently use to manage supply chains are inadequate in identifying the scale, scope and intensity of new issues that arose during the pandemic and, more importantly, how these solutions need to be augmented in the future. To zero in on practical solutions, this group focused on the most critical challenges to address; understanding the best practices to tackle these issues; and guiding the development of data driven, practical and scalable solutions to predict risk.

Key insights from the group discussion include:

  1. The need for early, actionable warning on risk. Food organizations are seeking actionable, early warning signals about upcoming supply chain issues. Risk alerts, if they do exist, currently tend to be disaggregated and dispersed within an organization and executives struggle to understand the full picture.
  2. The need to communicate risk across the organization and the supply chain. Executives are seeking ways to communicate forecasted risk in fact-based and data-driven ways across key stakeholders within and outside the organization. There was clear interest in ways to engage suppliers and parties up and down the supply chain.
  3. Focusing on the most important risks and scenario planning a workable approach. Organizations are seeking ways to future proof their supply chains and increase resilience. By ensuring that their strategies are tested to withstand likely scenarios and situations, organizations improve their ability to work under increased uncertainty.
  4. The ability to continuously monitor and vet suppliers, even in a remote setting. Organizations are looking to get ahead of supplier issues and are seeking ways to work with suppliers to continuously monitor, vet and manage issues as they arise. This requires increased transparency and greater communication across parties in the supply chain.

Participants of the group are also getting early access to the solution and data to support them in their food safety and supply chain risk management efforts. The group will continue to meet on over the next few months to continue to guide the development of a food supply chain risk management solution. We look forward to keeping you updated. If you have insights on this issue, we encourage you to reach out. If you are interested in learning more about us or joining the group, please contact us at nicole@meshintel.com

Are Traasdahl, Crisp
FST Soapbox

How a History of Slow Technology Adoption Across Food Supply Chains Nearly Broke Us

By Are Traasdahl
1 Comment
Are Traasdahl, Crisp

The COVID-19 crisis has exacerbated existing disconnects between food supply and demand. While some may be noticing these issues on a broader scale for the first time, the reality is that there have been challenges in our food supply chains for decades. A lack of accurate data and information sharing is the core of the problem and had greater impact due to the pandemic. Outdated technologies are preventing advancements and efficiencies, resulting in the paradox of mounting food insecurity and food waste.

To bridge this disconnect, the food industry needs to implement innovative AI and machine learning technologies to prevent shortages, overages and waste as COVID-19 subsides. Solutions that enable data sharing and collaboration are essential to build more resilient food supply chains for the future.

Data-sharing technologies that can help alleviate these problems have been under development for decades, but food supply chains have been slow to innovate compared to other industries. By reviewing the top four data-sharing technologies used in food industry and the year they were introduced to food supply chains, it’s evident that the pace of technology innovation and adoption needs to accelerate to advance the industry.

A History of Technology Adoption in the Food Industry

The Barcode – 19741
We’re all familiar with the barcode—that assemblage of lines translated into numbers and letters conveying information about a product. When a cashier scans a barcode, the correct price pops up on the POS, and the sale data is recorded for inventory management. Barcodes are inexpensive and easy to implement. However, they only provide basic information, such as a product’s name, type, and price. Also, while you can glean information from a barcode, you can’t change it or add information to it. In addition, barcodes only group products by category—as opposed to radio-frequency identification (RFID), which provides a different code for every single item.

EDI First Multi-Industry Standards – 19812
Electronic data interchange (EDI) is just what it sounds like—the concept of sharing information electronically instead of on paper. Since EDI standardizes documents and the way they’re transferred, communication between business partners along the supply chain is easier, more efficient, and human error is reduced. To share information via EDI, however, software is required. This software can be challenging for businesses to implement and requires IT expertise to handle updates and maintenance.

RFID in the Food Supply Chain – 20033
RFID and RFID tags are encoded with information that can be transmitted to a reader device via radio waves, allowing businesses to identify and track products and assets. The reader device translates the radio waves into usable data, which then lands in a database for tracking and analysis.

RFID tags hold a lot more data than barcodes—and data is accessible in remote locations and easily shared along the supply chain to boost transparency and trust. Unlike barcode scanners, which need a direct line of sight to a code, RFID readers can read multiple tags at once from any direction. Businesses can use RFID to track products from producer to supplier to retailer in real time.

In 2003, Walmart rolled out a pilot program requiring 100 of its suppliers to use RFID technology by 2005.3 However, the retail giant wasn’t able to scale up the program. While prices have dropped from 35–40 cents during Walmart’s pilot to just 5 cents each as of 2018, RFID tags are still more expensive than barcodes.4 They can also be harder to implement and configure. Since active tags have such a long reach, businesses also need to ensure that scammers can’t intercept sensitive data.

Blockchain – 20175
A blockchain is a digital ledger of blocks (records) used to record data across multiple transactions. Changes are recorded in real-time, making the history unfalsifiable and transparent. Along the food supply chain, users can tag food, materials, compliance certificates and more with a set of information that’s recorded on the blockchain. Partners can easily follow the item through the physical supply chain, and new information is recorded in real-time.

Blockchain is more secure and transparent, less vulnerable to fraud, and more scalable than technologies like RFID. When paired with embedded sensors and RFID tags, the tech offers easier record-keeping and better provenance tracking, so it can address and help solve traceability problems. Blockchain boosts trust by reducing food falsification and decreasing delays in the supply chain.6

On the negative side, the cost of transaction processing with blockchain is high. Not to mention, the technology is confusing to many, which hinders adoption. Finally, while more transparency is good news, there’s such a thing as too much transparency; there needs to be a balance, so competitors don’t have too much access to sensitive data.

Cloud-Based Demand Forecasting – 2019 to present7
Cloud-based demand forecasting uses machine learning and AI to predict demand for various products at different points in the food supply chain. This technology leverages other technologies on this list to enhance communication across supply chain partners and improve the accuracy of demand forecasting, resulting in less waste and more profit for the food industry. It enables huge volumes of data to be used to predict demand, including past buying patterns, market changes, weather, events and holidays, social media input and more to create a more accurate picture of demand.

The alternative to cloud-based demand forecasting that is still in use today involves Excel or manual spreadsheets and lots of number crunching, which are time-intensive and prone to human error. This manual approach is not a sustainable process, but AI, machine learning and automation can step in to resolve these issues.

Obtaining real-time insights from a centralized, accurate and accessible data source enables food suppliers, brokers, distributors, brands and retailers to share information and be nimble, improving their ability to adjust supply in response to factors influencing demand.8 This, in turn, reduces cost, time and food waste, since brands can accurately predict how much to produce down to the individual SKU level, where to send it and even what factors might impact it along the way.

Speeding Up Adoption

As illustrated in Figure 1, the pace of technology change in the food industry has been slow compared to other industries, such as music and telecommunications. But we now have the tools, the data and the brainpower to create more resilient food supply chains.

Technology adoption, food industry
Figure 1. The pace of technology change in the food industry has been slow compared to other industries. Figure courtesy of Crisp.

Given the inherent connectivity of partners in the food supply chain, we now need to work together to connect information systems in ways that give us the insights needed to deliver exactly the rights foods to the right places, at the right time. This will not only improve consumer satisfaction but will also protect revenue and margins up and down food supply chains and reduce global waste.

References

  1. Weightman, G. (2015). The History of the Bar Code. Smithsonian Magazine.
  2. Locken, S. (2012). History of EDI Technology. EDI Alliance.
  3. Markoff, R, Seifert, R. (2019). RFID: Yesterday’s blockchain. International Institute for Management Development.
  4. Wollenhaupt, G. (2018). What’s next for RFID? Supply Chain Dive.
  5. Tran, S. (2019). IBM Food Trust: Cutting Through the Complexity of the World’s Food Supply with Blockchain. Blockchain News.
  6. Galvez, J, Mejuto, J.C., Simal-Gandara, J. (2018). Future Challenge on the use of blockchain for food traceability analysis. Science Direct.
  7. (2019). Crisp launches with $14.2 million to cut food waste using big data. Venture Beat.
  8. Dixie, G. (2005). The Impact of Supply and Demand. Marketing Extension Guide.
Mike Edgett, Sage

COVID-19 Leads Food Companies and Meat Processors to Explore AI and Robotics, Emphasize Sanitation, and Work from Home

By Maria Fontanazza
No Comments
Mike Edgett, Sage

The coronavirus pandemic has turned so many aspects of businesses upside down; it is changing how companies approach and execute their strategy. The issue touches all aspects of business and operations, and in a brief Q&A with Food Safety Tech, Mike Edgett of Sage touches on just a few areas in which the future of food manufacturing looks different.

Food Safety Tech: How are food manufacturers and meat processors using AI and robotics to mitigate risks posed by COVID-19?

Mike Edgett: Many food manufacturers and meat processors have had to look to new technologies to account for the disruptions caused by the COVID-19 pandemic. While most of these measures have been vital in preventing further spread of the virus (or any virus/disease that may present itself in the future), they’ve also given many food manufacturers insight into how these technologies could have a longer-term impact on their operations.

For instance, the mindset that certain jobs needed to be manual have been reconsidered. Companies are embracing automation (e.g., the boning and chopping of meat in a meatpacking plant) to replace historically manual processes. While it may take a while for innovations like this to be incorporated fully, COVID-19 has certainly increased appetite amongst executives who are trying to avoid shutdowns and expedited the potential for future adoption.

FST: What sanitation procedures should be in place to minimize the spread of pathogens and viruses?

Edgett: In the post-COVID-19 era, manufacturers must expand their view of sanitation requirements. It is more than whether the processing equipment is clean. Companies must be diligent and critical of themselves at every juncture—especially when it comes to how staff and equipment are utilized.

While working from home wasn’t a common practice in the manufacturing industry prior to March 2020, it will be increasingly popular moving forward. Such a setup will allow for a less congested workplace, as well as more space and time for bolstered sanitation practices to take place. Now and in the future, third-party cleaning crews will be used onsite and for machinery on a daily basis, with many corporations also experimenting with new ways to maintain the highest cleanliness standards.

This includes the potential for UV sterilization (a tactic that is being experimented with across industries), new ways to sterilize airflow (which is particularly important in meatpacking plants, where stagnant air is the enemy) and the inclusion of robotics (which could be used overnight to avoid overlap with human employees). These all have the potential to minimize the spread of pathogens and, ultimately, all viruses that may arise.

Mike Edgett, Sage
Mike Edgett is an enterprise technology and process manufacturing expert with 20+ years leading business strategy for brands such as Infor, Quaker Oats and Bunge Foods. At Sage, he leads the U.S. product marketing team focused on the medium segment.

FST: How is the food industry adjusting to the remote working environment?

Edgett: While the pandemic has changed the ways businesses and employees work across most industries, F&B manufacturers did face some unique challenges in shifting to a remote working environment.

Manufacturing as a whole has always relied on the work of humans, overseeing systems, machinery and technology to finalize production—but COVID-19 has changed who and how many people can be present in a plant at once. Naturally, at the start of the pandemic, this meant that schedules and shifts had to be altered, and certain portions of managerial oversight had to be completed virtually.

Of course, with employee and consumer safety of paramount concern, cleaning crews and sanitation practices have taken precedent, and have been woven effectively and efficiently into altered schedules.

While workers that are essential to the manufacturing process have been continuing to work in many facilities, there will likely be expanded and extended work-from-home policies for other functions within the F&B manufacturing industry moving forward. This will result in companies needed to embrace technology that can support this work environment.

FST: Can you briefly explain how traceability is playing an even larger role during the pandemic?

Edgett: The importance of complete traceability for food manufacturers has never been greater. While traceability is by no means a new concept, COVID-19 has not only made it the number one purchasing decision for your customers, but [it is also] a vital public health consideration.

The good news is that much of the industry recognizes this. In fact, according to a survey conducted by Sage and IDC, manufacturing executives said a key goal of theirs is to achieve 100% traceability over production and supply chain, which serves as a large part of their holistic digital mission.

Traceability was already a critical concern for most manufacturers—especially those with a younger customer base. However, the current environment has shone an even greater spotlight on the importance of having a complete picture of not only where our food comes from—but [also] the facilities and machinery used in its production. Major budget allocations will surely be directed toward traceability over the next 5–10 years.

FDA

FDA Unveils Blueprint for New Era of Smarter Food Safety

By Food Safety Tech Staff
No Comments
FDA

Today FDA released the New Era of Smarter Food Safety Blueprint. The much-anticipated document was originally scheduled for release in March but was delayed due to the agency’s response to COVID-19. Although the agency’s plan places a lot of focus on the use of new technology, FDA Commissioner Stephen Hahn, M.D., stressed that it is also about enabling more effective methods and processes.

FDA’s Blueprint for the Future breaks down the four core elements of the plan:

  • Tech-Enabled Traceability. A lesson learned during the coronavirus pandemic was that there is a need for greater traceability and visibility in the supply chain. “One of the challenges we’ve faced over the years is recurring outbreaks of illnesses associated with the consumption of certain foods,” said Hahn. “What this daunting problem underscores is the critical importance of the FDA working with industry so that we can rapidly trace a contaminated food to its source. And when I say rapidly, I mean minutes, not days, weeks, or even longer.
  • Smarter Tools and Approaches for Prevention and Outbreak Response. Here, the FDA is emphasizing the “power of data”. “The plans embraced by the blueprint include strengthening our procedures and protocols for conducting the root cause analyses that can identify how a food became contaminated and inform our understanding of how to help prevent that from happening again,” said Hahn.
  • New Business Models and Retail Modernization. This element address food production and delivery, as well as food safety in restaurants and the retail setting.
  • Food Safety Culture. “The pandemic has given us a new perspective on what we mean by food safety culture,” said Hahn. He stated that beyond influencing human behavior, food safety culture must also address worker safety and consumer education.

View the New Era of Smarter Food Safety: FDA’s Blueprint for the Future.

Chris Keith, FlexXray
FST Soapbox

COVID-19: We’re In This Together

By Chris Keith
No Comments
Chris Keith, FlexXray

It’s no secret that the COVID-19 pandemic had a major impact on industries and individuals around the world. According to the World Health Organization, as of June 21, 2020, there have been 8,708,008 reported cases of COVID-19 globally, including 461,715 deaths. In a recent article by Forbes, healthcare contributor William Haseltine stated that we are gathering personal stories and statistics right now around COVID-19 survivors who have suffered permanent injuries from the virus. Many experts believe that COVID-19 is also an economic downturn trigger. Author and financial planner Liz Frazier says that even as recessions are a normal part of the U.S. economic cycle, lasting about five and a half years on average, the possibility of a recession starting due to the outbreak would be unprecedented.1 The COVID-19 pandemic is a natural disaster that rocked the world and is a reminder of how connected people are in a global economy.

As quarantine regulations and temporary closures happened across the United States, businesses had to mobilize quickly, pivoting their strategies, distribution efforts, products and beyond to accommodate the new safety measures and external pressures. The food and beverage industry was no different. Although food manufacturers were deemed essential in the United States by Cybersecurity & Infrastructure Security Agency (CISA), manufacturers had to adapt to a new normal during the shutdown.2 Some of the biggest changes that occurred in the food manufacturing industry include fluctuating customers, prices, product and ingredient availability, packaging, distribution, and food quality and safety.

Shifting Demand, Customers and Food Pricing

Sharp changes in food prices and product availability shocked supply and demand and impacted the entire food supply chain across the United States. According to the USDA, there were record levels of demand for food at grocery stores, and, on the supply side, there has been a reduced supply of meat products over the period of quarantine as meatpacking plants faced temporary closures, decreased slaughter pace, and slower production due to COVID-19 regulations.3 Poultry prices took a sharp dip and have been rebounding, hot dog prices are at an all-time high due to increased demand, and beef prices have been climbing due to scarce supply and limited fresh production. Food pricing fluctuation is one of the largest food industry impacts felt directly by the general public and the on-premise sector. Restaurants and bars were crushed by the skyrocketing ingredient prices and mandatory temporary closures due to COVID-19.

As restaurants, school cafeterias and hotels were temporarily shut down due to quarantine restrictions, the food manufacturing industry’s most prominent customers practically disappeared. Before COVID-19, the USDA reported that in 2018, restaurants provided approximately 50% of meals consumed on a daily basis, up from 41% in 1984.4 When COVID-19 hit, consumer trends showed a monumental shift to eating at home. During the height of the pandemic, more people ordered take out from fast-casual dining places and ate from home. A recently published study reveals survey findings that suggest American’s food habits are shifting, as 54% of respondents confirmed they are cooking more, and 46% of respondents, baking more.5 As customers and demand changed, products and packaging had to follow suit.

Scores of manufacturing facilities had to rapidly respond with different products to meet changing consumer demand, despite already being in mid-production for products for restaurant kitchens, cafeterias, and the like. Most of these large-scale and wholesale products would never make it to their original, intended destinations. Manufacturers swiftly adapted their production, creating retail-ready goods from product made or intended for restaurant or fast food supply. These food production facilities had to creatively find ways to change product packaging sizes, salvaging good product with take-home cartons and containers. Some processors pre-sliced deli meat for grocery stores around the country, as markets were unable to slice the meat in-store, dealing with restrictions on the number of people who could work at any given time. The food manufacturing industry showed great ingenuity, repurposing food and getting creative in order to keep the country fed and bridge the gap in convenience shopping that consumers have grown used to.

New Distribution Pressures

There were also disruptions in the food industry’s distribution channel, and the logistics of distribution were adversely affected. Facilities faced increased pressure to have tighter production turnarounds from new consumer behavior and out-of-stock situations as many markets dealt with temporary panic shopping at the beginning of the crisis. Food manufacturing facilities have always faced tight deadlines when dealing with fresh and refrigerated product. However, COVID-19 introduced new critical, immediate needs to the food supply, and, more than ever before, facilities were pressed for time to deliver. Some facilities didn’t have enough dock loading time, and certain cold storage facilities could not meet the raised demands for dock times, making it harder to get product through the distribution channel to consumers. Shipping and logistics came at a premium. Drivers and logistics companies were at capacity with their service offerings, and unable to mobilize to meet the needs of every manufacturing company.

On top of the pressures from consumer demand, manufacturing facilities had to procure PPE (personal protective equipment) in mass for all employees and adjust employee schedules to meet new national and state-wide quarantine restrictions that strained the system. The PPE requirements are part of the distribution logistics, as plants are unable to distribute safe product without adhering to the system’s regulations. Senior Vice President of Regulatory and Environmental Affairs for the National Milk Producers Federation, Clay Detlefsen, said in an article for Food Shot Global that the whole food industry’s system has been turned on its head, as manufacturers are concerned that if they start running out of PPE and sanitation supplies, they would ultimately be forced into shutting down their food processing plants.6

Regulating Food Quality and Safety

Perhaps one of the biggest concerns surrounding the food supply chain during the height of COVID-19 for both producers and consumers was food safety. While safety and quality are always a high priority in the food industry, rising concern around the transmission of COVID-19 became a new and unprecedented challenge for food quality experts. In February the FDA declared that COVID-19 is unlikely to pass through food or food packaging, but that didn’t stop public concern.7 It was critical for food manufacturers and producers to ease public fear, keep the food supply stable and eliminate foreign material contamination that would adversely affect consumers and brand reputation. A mass recall due to foreign material contamination would have dire consequences for the strained food supply chain during this historic crisis. At the same time, the pandemic limited quality and food safety teams, as key teams had to work remotely, shift schedules had to drastically change to meet new safety regulations, production lines cut in half, and quality and safety teams had to make rushed decisions when it came to reworking product.

Some plants that faced potential foreign material contamination risked sending their product into distribution without a thorough rework, up against tight deadlines. And some plants adopted a multifaceted strategy and did something they’ve never done before: Reworked product on hold for potential foreign material contamination themselves. Many of these companies reworked product with their extra available lines, to keep as many of their workers as possible, despite the fact that food production employees are untrained in finding and extracting foreign contaminants. Inline detection machines are also typically limited to metal detection, often incapable of consistently catching many other types of contaminants such as glass, stones, plastic, bone, rubber, gasket material, container defects, product clumps, wood and other possible missing components. Food safety is of the utmost importance when a crisis hits as the food supply chain is crucial to our success as a nation and as an interconnected world. Facing new pressures on all sides, the food industry did not neglect food safety and quality, even while adopting new strategies. There was never a doubt that the industry would overcome the new challenges.

Looking Forward

The food industry has rapidly switched business strategies, swiftly turned around new products, found new ways to align product traceability and work remotely while still meeting industry standards and production expectations. Manufacturing facilities repackaged and repurposed food to keep the country fed, maintained job security for many employees and procured PPE in mass. The food industry is also full of manufacturers and plants that accomplished things they’ve never done before. There are shining examples of heroism in the food and beverage space as a growing list of food businesses, restaurants and delivery services have donated to healthcare workers on the front lines. Many large companies donated millions of dollars and pounds of food to feed their teams, their communities and the less fortunate.8 In the midst of a large obstacle, we have reached new heights and discovered new capabilities.

The challenges aren’t over. The food industry is still facing the effects of COVID-19 shutdowns on businesses even during this period of re-opening in different parts of the country. A lot of places and companies have been hit hard, some even closing their doors for good. Forbes reported at the onset of the pandemic that Smithfield Foods shut down one of its pork processing plants after hundreds of the plant’s 3,700 employees tested positive for coronavirus.8 Tyson Foods also shut down several meat processing plants under threat of the virus.8 Smithfield and Tyson were not the only ones. Food Dive has a compiled tracking system for coronavirus closures in food and beverage manufacturing facilities, recording reduced production, temporary closures, and permanent shutdowns across the industry. We expect some of the COVID-19 challenges to alleviate over time and hope that business will slowly return to normal and previously closed facilities will be able to re-open. However, we strongly hope some changes to the industry will remain: Creativity, ingenuity, resilience, adaptability, and a strong commitment to customers and partners. The bottom line is we’re in this together––together, we’re resilient.

References

  1. Frazier, L. (April 21, 2020). “How COVID-19 Is Leading The US Into A New Type Of Recession, And What It Means For Our Future.” Forbes.
  2. Krebs, C. (May 19, 2020). “Advisory Memorandum on Identification of Essential Critical Infrastructure Workers During COVID-19 Response.” Homeland Security Digital Library.
  3.  Johansson, R. (May 28, 2020) “Another Look at Availability and Prices of Food Amid the COVID-19 Pandemic.” USDA.
  4. Stewart, H. (September 2011). “Food Away From Home.” The Oxford Handbook of the Economics of Food Consumption and Policy. 646–666. Oxford University Press. doi: 10.1093/oxfordhb/9780199569441.013.0027
  5. The Shelby Report. (April 17, 2020). “New Study Reveals Covid-19 Impact On Americans’ Food Habits.”
  6. Caldwell, J. (April 16, 2020). “How Covid-19 is impacting various points in the US food & ag supply chain”. AgFunderNews.
  7. Hahn, M.D., S. (March 27, 2020). Coronavirus (COVID-19) Supply Chain Update. FDA.
  8. Biscotti, L. (April 17, 2020). “Food And Beverage Companies Evolve, Innovate And Contribute Amid COVID-19 Crisis.” Forbes.
Jason Chester, InfinityQS
FST Soapbox

Digital Revolution: Empowering the Remote Workforce and Resilience Post-COVID-19

By Jason Chester
No Comments
Jason Chester, InfinityQS

Around the world, countries are beginning to take tentative steps toward a return to normalcy following months of stay-at-home mandates and other restrictions in light of COVID-19. Slowly, we’re starting to see employees return to their offices, retail stores open their doors, and restaurants welcome back patrons. However, many will find themselves in a world dramatically different from the one they left before quarantine.

Namely, on top of social distancing and disinfection measures to control further spread of the virus, entire industries are re-examining their legacy processes and systems—especially ones that presented operational challenges at the pandemic’s outbreak—the food manufacturing industry included.

In truth, food manufacturers have gone to great lengths to maintain productivity and output to meet demand throughout the pandemic. But they have done so in the face of unprecedented circumstances, with many plants operating with limited workforces and key employees like quality professionals and plant managers shifted to remote work. Lacking connectivity between those on the plant floor and at home due to long-held manual processes, a growing number of manufacturers must now take a hard look at their quality and safety programs and embrace digital tools.

A Wake-Up Call for Digital Transformation

Most technological investments in food manufacturing over the past several decades have centered on electro-mechanical automation designed to scale up the physical production process. Fewer investments, however, have been made on the equally important data-driven, decision-making process necessary for ensuring optimal performance, food quality and safety.

Even in the most heavily automated plants, it’s not uncommon to find manufacturers managing quality through manually updated spreadsheets, which are often only reviewed after the fact, when it’s too late for remedial correction. There are unfortunately also those who still rely on paper checklists, making it practically impossible to take proactive action on collected process data—much less get the information in front of remote quality professionals and managers. Meanwhile, others have gone as far as adopting software solutions for quality data management and process control, but these tend to be on-premises systems that employees can’t access outside of the four walls of the plant.

We have also seen many examples where, due to workforce restrictions and availability, employees from other parts of the manufacturing business (e.g., R&D, IT, and back-office teams) have been brought in to perform plant-floor activities like quality and food safety checks. The goal has been to prevent impediments to production output, just when demand has increased substantially. But ensuring that these employees perform the checks on time and in the correct way—with little time for training or coaching—has left many plant leaders in a precarious position.

The challenges seen with these capabilities and enabling geographically dispersed teams to work together through the pandemic have been a wake-up call of sorts for digital transformation. Manufacturers are coming to the realization that they’ll need data accessibility, actionability and adaptability along the road to recovery and in the post-COVID-19 world. And with social distancing and other workplace precautions expected to continue for the foreseeable future, the imperative is all the more urgent.

The Solution Lies in the Cloud

To digitally transform quality and safety programs today, food manufacturers should prioritize investment in the cloud. Notably, cloud-based quality management systems offer a way to standardize and centralize critical process information, as well as tools to empower employees at all levels of the enterprise.

For plant-floor operators struggling to keep up on account of reduced workforce sizes, such solutions can automate routine yet important activities for quality assurance, including data collection, process monitoring and reporting. If a team member needs to cover a different shift or unfamiliar task, role-based dashboards can help them to see required actions, while process workflows can provide guidance to ensure proper steps are taken even with a limited workforce. Further, automated alerts can provide timely notifications of any issues—whether it be a missed data collection or an actual food quality or safety concern present in the data.

Perhaps most importantly during the pandemic and for the post-COVID-19 world, the cloud makes critical quality data instantly and easily accessible from anywhere, at any time. Quality professionals, plant managers, and other decision-makers can continue to monitor and analyze real-time process data, as well as observe performance trends to prevent issues from escalating—all safely from home.

The scalability of cloud-based solutions also streamlines deployment so organizations can rapidly implement and standardize on a single system across multiple lines and sites. In doing so, it becomes possible to run cross-plant analyses to identify opportunities for widescale process improvement and align best practices for optimal quality control at all sites. This ability to understand what’s happening in production—through real-time data—to enact agile, real-world change is a hallmark of successful digital transformation.

An Investment for Whatever the Future Holds

Ultimately, investments in secure cloud-based quality management and the broader digital transformation of manufacturing operations are investments in not only perseverance during the pandemic, but also resilience for the future. Food producers and manufacturers who can readily access and make informed decisions from their data will be the ones best equipped to pivot and adjust operations in times of disruption and uncertainty. And while it’s unclear what the future holds for the world, the food industry, and COVID-19, it’s safe to say we likely won’t see a full return to normalcy but the emergence of a new—and in many ways better—normal, born out of digital solutions and smarter ways of thinking about quality data collection and monitoring.

FDA

FDA Expects to Release Blueprint for New Era of Smarter Food Safety Soon

By Food Safety Tech Staff
No Comments
FDA

On October 1, Frank Yiannas will be the keynote speaker for the 2020 Food Safety Consortium Virtual Series || The series takes place during the weeks of September 3 through December 17Expect the much-anticipated blueprint for FDA’s New Era of Food Safetyto be released soon. The agency has not provided an exact date but in an update prior to the July 4th holiday, FDA stated it would be rolled it out “in the coming weeks”.

“The challenges we’ve faced during the pandemic have made it clear that the goals we set forth in the New Era blueprint are more important now than ever. Some of them, like enhanced traceability, are particularly meaningful in light of recent events,” Frank Yiannas, FDA’s Deputy Commissioner for Food Policy and Response, stated in an agency consumer update. “What we have learned from the pandemic is that we’re on the right track with the New Era of Smarter Food Safety. The steps that we’ll take will prepare us to protect the safety of our food supply, no matter what challenges we face.”

In addition to the focus on emerging digital technologies, traceability in the supply chain, ensuring safety in the home delivery of food (e-commerce), and food safety culture, FDA will be including the lessons learned from the COVID-19 pandemic as part of the blueprint structure.

Megan Nichols
FST Soapbox

COVID-19 Led Many Dairy Farmers to Dump Milk

By Megan Ray Nichols
No Comments
Megan Nichols

Much of the news coverage surrounding the COVID-19 pandemic mentions infection numbers and fatalities. Those are undoubtedly important for showing parts of the overall impact. However, it’s easy to overlook the ramifications felt by some professionals. One recent example concerns the instances of dairy farmers dumping milk.

Numerous Factors Contributing to the Problem

The pandemic drastically and dramatically disrupted life. Many of the associated changes affected milk producers, but perhaps not in the ways people expect. As schools closed and restaurants operated on delivery or a takeaway-only basis, the demand for milk typically consumed in the food and educational sector went down.

Consider, too, that the pandemic forced the closure of enterprises that did not necessarily serve large quantities of milk every day but still likely placed ongoing orders with suppliers. For example, a daycare center might give toddlers boxes of dairy beverages each day during snack time. Coffee shops often add milk to their lattes or set out bottles for people who want to put some in their coffee.

When coronavirus cases emerged in the United States, many people panicked and flocked to grocery stores for essentials. Milk is often one of the staples people buy before winter storms hit, and they wanted it to prepare for the pandemic, too. One Target store in New Jersey sold out of its entire stock of milk in only five minutes. Stores responded by imposing per-person limits on the product.

If the demand exists, what caused the milk surplus? Part of it boils down to a lack of space at milk processing plants. A related issue is that processors typically serve particular markets. One might cater to retail buyers while another primarily addresses needs in the food service sector. They lack the infrastructure to pivot and begin accepting milk orders from a new type of customer, particularly if the milk-based product is substantially different, like sour cream versus ice cream.

A First-Time Phenomenon

Farmers discarding milk is not unheard of, but it’s not something many producers do regularly. Andrew Griffith, a professor at the University of Tennessee, said that some farmers had to do it recently for the first time in careers spanning decades. He explained, “It’s not that [dumping] hasn’t occurred from farm to farm.” Adverse weather conditions can delay pickups, and unexpected supply spoilages might lead to too much milk.

“But we’re talking about a level of dumping that is not common at all. There [are] a lot of farmers that are experiencing dumping milk for the first time in their 30- or 40-year careers,” Griffith said in an article published on The Counter.

The highly perishable nature of milk poses another problem contributing to the milk surplus. That aspect hit dairy harder than some other types of agricultural goods. People could put grain into silos, but storage is more complicated for dairy products.

Any exposure to higher-than-recommended temperatures causes spoilage. The subsequent risk to consumers means farmers must throw it away. Cold storage facilities are essential for the dairy industry. Statistics from 2018 indicated an average of 10.67 cents per kilowatt-hour for energy consumption at commercial facilities. However, cold storage facilities operate 24/7, so their energy needs are often higher than those of other commercial buildings.

Cows, dairy, farms
The coronavirus is only one of the challenges likely to impact the dairy industry in the coming months and years. Dairy consumption has been trending down for years. (Pexels image)

The delicate nature of the product is another unfortunate aspect that may lead to dumping milk. If a processor has no room to accept the raw goods, there’s nowhere for them to go. In April The Wall Street Journal reported that in one week, producers threw out as much as 7% of the milk in the United States from that period. The same story highlighted how a specialty cheese factory saw sales of its chèvre and ricotta drop by 95% in one day.

Coping With Dairy Industry Fluctuations

The coronavirus is only one of the challenges likely to impact the dairy industry in the coming months and years. A Statista chart profiles the progressive decline of milk consumption in the United States. The average amount of milk per person in 1975 totaled 247 pounds. It plunged to 149 pounds by 2017.

There’s also the issue of people showing a growing preference for plant-based milk alternatives. One industry analysis tracked sales of traditional and oat milk during mid-March. Purchases for the first category rose by 32%, while oat milk sales soared by 476%. A potential reason for that huge increase in the latter category is that supermarkets sell shelf-stable milk alternatives. Those often stay in date for months when unopened.

People can get them in the refrigerated section, too, but they may have preferred not to as they cut down their shopping trips due to COVID-19. Consumers also noticed the increasing number of milk-like beverages made from hemp, hazelnuts and other options. If a person tries one and doesn’t like it, they may try a different option.

Despite those challenges, some dairy farmers anticipated favorable trends—at least before the coronavirus hit. Producers get paid per 100 pounds of milk. Katie Dotterer-Pyle, owner of Cow Comfort Inn Dairy, said 2013 was a particularly good year for the rates. Back then, farmers received about $30 for every 100 pounds, although the price has stayed at approximately $17 per 100 over the past two years.

When Might the Milk Surplus Ease?

This coverage emphasizes the lack of a quick fix for the dairy industry strain. As restaurants reopen, that change should help address the problem, but it won’t solve it entirely. Some enterprises refocused their efforts to better meet current demands. One Dallas-based plant that handles dairy products more than halved its output of cardboard milk cartons and increased production of whole and 2% milk for the retail sector. It is now back to normal manufacturing runs.

As mentioned earlier, though, many processors can’t make such changes. Dumping milk becomes a heart-wrenching practice for hard-working producers. Many tried to compensate by selling their least-profitable cows for slaughter or making feeding changes to reduce the animals’ production. Some private entities committed to purchasing milk from farms and getting it to food banks. Other analysts say the government should step in to help.

People in the farming community support each other with tips and reassurance, but most know they could be in for a long struggle. As supply chains recovered from the initial shock of COVID-19, most people stopped panic buying, and stores no longer set product limits. Things are moving in the right direction, but the impacts remain present.

A Complicated Issue

Many state leaders have let businesses reopen, and others are following. Any step toward a new kind of normal is a positive one that should gradually help the dairy sector. However, much of what the future holds remains unknown, mainly since this is a new type of coronavirus, and scientists still have plenty to learn about mitigating it.

Coronavirus, COVID-19

China Stops Poultry Imports From Tyson Foods Due to COVID-19 Concerns, Clamping Down on Inspections

By Food Safety Tech Staff
No Comments
Coronavirus, COVID-19

On Sunday China’s General Administration of Customs announced that it would be suspending imported shipments of poultry from a Tyson Foods plant based in Springdale, Arkansas. The suspension is reportedly due to an outbreak of coronavirus cases at the facility.

On Friday Tyson Foods announced the results of COVID-19 testing conducted at its facilities in northwestern Arkansas (Benton and Washington counties): 3,748 employees were tested; 481 tested positive, and 95% were asymptomatic.

“The results across our Northwest Arkansas facilities, and the country more broadly, reflect how much is still unknown about this virus, which is why Tyson is committed to providing information to our local health officials and enhanced education to our team members,” said Tom Brower, senior vice president of health and safety for Tyson Foods stated in a company press release. “Through our inclusive approach to large-scale testing, we are finding that a very high level of team members who test positive do not show symptoms. Identifying asymptomatic cases helps the community, since other testing is often limited to people who feel unwell.”

Meanwhile, it has also been reported that officials in China want the inspection process of overseas shipments ramped up, as they suspect that COVID-19 could be present on imported frozen food products.

Over the weekend PepsiCo’s Beijing operations were suspended following confirmed coronavirus cases at its chips production facility.

Last week new cases of the coronavirus were reported in Beijing, leading to concerns of a resurgence of the virus. Some new cases have been linked to the Xinfadi Market, a wholesale food market.

Mice, pests

Pests Don’t Rest During a Pandemic

By Food Safety Tech Staff
No Comments
Mice, pests

The COVID-19 pandemic has forced the closure of hundreds of restaurants, food processors and other businesses nationwide. As weeks went on, increased rodent activity plagued many businesses, some of which has been attributed to a change in food sources and availability—so much so that the CDC released a warning about rodent control in restaurants and other commercial businesses that have either been closed or have had limited service during the pandemic. “Environmental health and rodent control programs may see an increase in service requests related to rodents and reports of unusual or aggressive rodent behavior,” the CDC stated last month.

As the American economy reopens, many food establishments and facilities must consider three key points that will affect pest management during this time:

  • Pest pressure continues. Rodents are on a never-ending search for food, water and harborage.
  • Change in business patterns. Different inbound and outbound shipments; changes in employee shifts and production schedules; new supply chain partners.
  • Service provider access. Access to facilities and secure areas; changes in facility structure, equipment and storage

Factoring the many changes that COVID-19 has prompted, the role of pest management is more important than ever. We invite you to join us for Food Safety Tech’s upcoming complimentary virtual conference, “Integrated Pest Management: Protect Food Safety and Prevent the Spread of Pathogens”, on June 30. Our Technical Service Lead, Joe Barile, will discuss pest management and risk mitigation in the COVID-19 world; he will be followed by Orkin’s VP of Quality Assurance and Technical Services, Judy Black, on the key components to successful IPM and pest management programs, and Angela Anandappa, Ph.D. of the Alliance for Advanced Sanitation on how an effective sanitation program can protect against pest and food contamination. Register now.