Tag Archives: integrated bird management

Brett Madden, Aviaway
Bug Bytes

How to Prepare an Integrated Bird Management Audit Program

By R. Brett Madden
No Comments
Brett Madden, Aviaway

Birds of different species can become a pest problem depending upon where they are landing, roosting or nesting. In terms of food facilities, birds can cause various concerns: Product safety risks, possible contamination (bird droppings/feathers), poor audit grades, inspection failure, secondary insect pest problems, vectoring of foodborne illness pathogens, plant closures or fines. It is for these reasons that it is essential that food, beverage and product manufacturers (FBP) establish an integrated bird management (IBM) program.

An IBM program will ensure that every essential team member is on the same page in terms of the protocols for managing pest birds within and around the facility. Even if a facility has taken a proactive approach to bird control, the potential exists for birds to enter a facility. Especially considering bird pressures around adjacent properties, buildings, bodies of water and food sources near the facility.

Read Part I of this series: Bird Problems and Control Methods for Food Production FacilitiesIBM for food industry facilities is a systematic approach to preventing birds from gaining access within a facility and reducing the length of time birds remain within a facility. Nuisance birds, depending upon how severe the bird pressure—i.e., how many birds are landing, roosting and/or nesting within a given area—can cause severe damage to equipment, property, food products, displays, vegetation, façade signage, ledges, roofs, HVAC equipment, drains, fire suppression, electrical equipment and more. The longer that birds are permitted to remain within and around a facility, the more damage they can cause, and the harder it is to remedy the problem. Thus, it is critical to remove any birds that have gained entry as soon as possible to prevent possible FBP contamination and the birds getting comfortable within the facility.

There are several components to developing an IBM program. First, you need to conduct a complete inspection of the interior/exterior of the facility, followed by a review of the current data as well as any historical bird data. Now that you have all the raw data, you can begin developing the site-specific IBM plan for the FBP facility. Now that you have the program designed, the program can be implemented. Finally, after a defined timeframe that the IBM program has been active, the program needs to be evaluated to determine if any adjustments need to be made to the program.

Inspection

The first step in developing an IBM program is to conduct an initial site inspection audit of the interior and exterior of the facility.

Integrated bird management, audits, food safety
An example of an integrated bird management food safety audit checklist. Credit: Aviaway

The following various elements need to be inspected and with said findings documented.

Interior audit, pest management
An example of an interior audit spreadsheet. Source: Aviaway. (Click to enlarge)

On the interior of the facility, look at the following items:

  • Active Birds with the Facility
    • List the areas and locations of birds
      • Example: Location(s): Food prep area(s), warehouse, etc.
    • Any history of birds and related areas
  • Interior Landscaping
    • Type(s) and necessity
  • Food Processing Areas
    • Any active control measures in place
    • Assess the level of risk
  • Bay Doors
  • Location(s): Gaps
  • Location(s): Bumpers
  • General Doors
    • Location(s): Gaps
    • Location(s): Bumpers
    • Location(s): Structural
    • Location(s): Doors left open
  • Additional Access Point(s)
    • Check all equipment areas that enter/exit building
  • Pipe-Line Penetrations
  • Sanitation
  • Conductive Conditions
    • Location(s): Standing water
    • Location(s): Food Sources
    • Debris
  • Bird Droppings or Nesting Materials
  • Staff feeding birds
    • All access to food and water
Exterior audit, pest management
An example of an exterior audit spreadsheet. Source: Aviaway. (Click to enlarge)

On the exterior of the facility, look at the following items:

  • Active birds with the facility
    • List the areas and locations of birds
      • Example: Locations(s): Rear loading dock
    • Any history of birds around the exterior of the facility
  • Adjacent Structures
    • Accessory buildings and structures
  • Sanitation Practices (Exterior)
    • Location(s): Dumpsters
    • Exposed food sources and spillage
  • Trash Receptacles
  • Trash Removal Frequency
  • Food Waste on Ground
  • Cleaning Practices
  • Cleaning Practices Schedule
  • Cleaning Food Waste Bins
  • Motion Doors
  • Bay Doors (Exterior)
    • Location(s): Gaps
    • Location(s): Bumpers
    • Location(s): Structural
  • General Doors (Exterior)
    • Location(s) Doors Being Left Open
  • Additional Access Point(s)
  • Bodies of Water
  • Conductive Conditions
  • Structural (Exterior)
    • Location(s): Pipe-Line Penetrations
    • Location(s): Flashing
    • Location(s): Pipes
    • Location(s): Openings
    • Location(s): Roof
    • Location(s): Roof Hatches
    • Location(s): Windows
    • Location(s): Canopy (Front/Rear)
    • Location(s): Awnings (Front/Rear)
    • Location(s): Façade Signage (Front/Rear/Side)
  • Drainage
  • Standing Water
  • Clogged Drains
  • Landscaping
    • Retention ponds
  • Bird Droppings or Nesting Materials
  • Exterior Storage
  • Merchandise Displays
  • Existing Bird Control Devices

Review

Next, after all the above items have been inspected and findings recorded, all the data needs to be reviewed. In addtion, all the current bird management practices within the facility, documentation practices, and current audit/inspection findings should be all evaluated together. All this information is your road map for developing your IBM Program. Make sure that while you are collecting all the said raw data, you also speak with all necessary staff to get the most accurate information possible.

Documentation

Now that you have conducted your inspections and collected all the data, it’s time to create a site-specific IBM Policy & Plan for the facility. The development and implementation of the IBM plan will provide the appropriate procedures that are to be implemented to prevent, control and exclude birds from entering a facility and from keeping birds an acceptable distance away from the facility. With proper training and implementation of IBM procedures, there will be a reduced likelihood that birds will be able to enter the facility, and the length of time birds remain inside the facility will be reduced—thus, reducing the level of pest bird damage caused, reducing hazards to food sources, equipment, the public, and the facility environment.

Each facility is unique in its operation, location and potential for bird activity. The facility’s IBM plan will be designed to factor its control options when remedying and preventing bird pressure.

Implementation

Now that you have an IBM Plan, it’s time to implement the plan. First, make any necessary changes based upon findings of the audit and review of all data. Next, correct any conducive conditions that were discovered during the inspection. All the items that may require adjustment may need to be planned out depending upon budgetary constraints. Define staff roles regarding bird control efforts on a front-line facility level. Each member of the action team must fully understand their role and responsibility about the implementation and day-to-day operation of the plan.

The IBM Plan is the roadmap that should be followed for managing pest birds throughout the interior and exterior of the facility and related structures. It will set forth the facility’s bird threshold levels and site-specific facility needs. Furthermore, the IBM Plan will provide in detail how each phase of the plan will be implemented at each facility. The facility coordinator, in collaboration with the IBM coordinator, shall be responsible for the administration and implementation of the IBM plan. Each of their roles and responsibly should be thoroughly reviewed and understood.

Next, conduct staff training on proper bird control removal methods if handing live removal internally. Otherwise, what are the approved processes for third-party vendors who are providing removal services? Finally, conduct a review of the new documentation process to record all necessary data for the IBM program. Data collection is a critical component in evaluating the success of the plan and determining if any adjustments need to be made.

Evaluation

To ensure goal compliance, the IBM program should be evaluated at each site annually. The review must consist of all records, the number of birds that gained access into the store, corrective actions taken (at the facility level and outside efforts), and any plan adjustments. By reviewing all the data collected, the plan’s effectiveness can be determined, and whether alterations need to be made. Note that the IBM plan is not a static document that sits in a binder. The plan will have to evolve as operations change, or the set goals of the program are not met.

Conclusion

A proactive approach to reducing bird populations is critical for food industry facilities. As such, the IBM program will ensure that your entire staff is adequately trained on all the site-specific bird control methods, reduce the frequency of birds entering the facility and create a documented bird control program that is designed for your specific facility.

Brett Madden, Aviaway
Bug Bytes

Bird Problems and Control Methods for Food Production Facilities

By R. Brett Madden
No Comments
Brett Madden, Aviaway

Various types of pest birds can impact food plant structures and facility surroundings. Even a single bird that finds its way into a food plant can trigger a host of concerns such as, failed audits, product contamination, plant closure, production stoppage, lost revenues, fines, structural damage, health hazards to occupants and fire hazards.

In most cases, a food plant operation has a bulletproof pest control plan; however, in most cases, birds are always an afterthought in most pest management plans. After inspecting and consulting numerous food plants, I hear the same story over and over: “I have a person in the warehouse that can chase them out” or, “are birds really a big deal?” or, “why do I have to be concerned about birds?” and on and on. Despite what you may think, birds are a big deal, and you should take them seriously!

Pest management, pigeon droppings HVAC
Larger birds, such as pigeons, can cause more problems around the exterior of a facility on HVAC units as seen here. (Image courtesy of Aviaway Bird Control Services & Consulting)

Since food processing plants contain areas that have very sensitive environments, birds can introduce various adulterants and harmful contaminants. Birds can cause potential harm to humans due to foodborne illness.

Pest Bird Species

There are four main pest birds: Pigeon, Starling, Sparrow and Seagull. Each one of these birds can cause a host of concerns and issues for food processing facilities. Just one bird can cause catastrophic damage. In most cases, small pest birds such as Sparrows and Starlings can gain access into a facility through a variety of ways:

  • Damaged bumpers around truck bay loading dock doors.
  • Open doors (seems obvious, but I always find doors wide open during audits).
  • General building deficiencies.

Larger birds, such as Pigeons and Seagulls, typically cause more problems around the exterior of a facility on ledges, rooftops, HVAC units, loading docks and related areas.

In either case, these various types of pest birds can cause significant problems on the interior and exterior of food plants.

Conducive Conditions

In most cases, facilities want to reduce as many conducive conditions as they can around and within the facility in a timely fashion. A conducive condition is one whereby due to a building condition, structural design, equipment operation, food or water source, or surrounding conditions (i.e., near a public landfill, raw materials mill or body of water) can attract pest birds to a facility. With each of these conditions, great care must be taken to reduce as many conducive conditions as possible.

Examples of Conducive Conditions

Structural Conditions

  • Loading docks/canopies with open beams and rafters
  • HVAC equipment
  • Pooling water (roof and landscaping)
  • Structural overhangs and ledges
  • Open access points
  • Landscaping (types of plantings)
  • Damaged truck bay bumpers
  • Gaps and opening around the structure
  • Doors with improper sealing

Human Conditions

  • Open dumpsters
  • Overflowing dumpsters
  • Dirty dumpsters
  • Product spillage
  • Employees feeding birds
  • Doors left open

All these conducive conditions, if left unresolved, can lead to significant bird problems. Reducing as many conducive conditions as possible will be the first step of any bird management program.

Bird Control Methods

From the start, your facility should have a bird management plan of action. For the most part, bird problems should not be left to be handled internally, unless your staff has been properly trained and has a bird management plan in place.
Most birds are protected by the Federal Migratory Bird Treaty Act of 1918. However, Pigeons, Sparrows, and Starlings are considered non-migratory birds and are not protected under this Act. Even though these three bird species are not protected, control methods still need to be humane. More specifically, your bird control program must also comply with is the American Veterinary Medical Association (“AVMA”) Guidelines for the Euthanasia of Animals if this is the control method selected. The AVMA considers the House Sparrows, Feral Pigeon, and the Common Starling “Free-Ranging Wildlife.” And Free-Ranging Wildlife may only be humanely euthanized by specifically proscribed methodology.

In addition to the above-mentioned regulations, various regulations regarding the relocation of birds/nests may also apply. I also always recommend checking with local and state agencies to ensure that there are no local regulations that may apply. Bottom line: Don’t rely on untrained internal practices; one misstep could result in heavy financial fines and penalties.

Bird Management Strategies

First Line Defense

  • Stop any bird feeding around the facility immediately
    • Any bird management plan should have a clear policy prohibiting employees from feeding birds. Once birds have been accustomed to routine feeding, the birds will continue to return.
  • Eliminate Standing Water Sources
    • All standing or pooled water needs to be eliminated. Thus, routine roof inspections need to be conducted to ensure drains are working properly.
    • Landscape irrigation needs to be calibrated to ensure no puddling of water in areas of low sun exposure.
  • Proper Sanitation Practices
    • Ensure that dumpster lids are closed when not in use.
    • Trash removal frequency adequate.
    • Routine cleaning of trash receptacles.
    • Immediate removal of spilled food.
  • Eliminate Entry Points
  • Survey the facility to ensure that all holes are properly sealed.
    • Around truck bay bumpers and doors
  • Exhaust vents are properly screened.
  • Windows are closed and have screens when in use.

The most appropriate bird control strategy will be determined based on the severity of the bird pressure. For example, if the bird pressure is high (birds have nested), then in most cases, you will only be able to use bird exclusion methods. Whereas, if the bird pressure is light to moderate (birds have not nested), bird deterrent methods can be used. This is an important distinction. Bird exclusion is physically changing the area to permanently exclude said pest birds. Whereas, bird deterrent devices inhibit birds from landing on treated areas.

Bird Deterrent Methods

After the previously mentioned first-line strategies have been implemented, the next step would be to install bird deterrent products (birds have not nested).

  • Bird Spikes
  • Bird Wire
  • Electrified Shock Track
  • Bird Gel
  • Sonic & Ultra Sonic Devices
  • Lasers and Optical Deterrents
  • Hazing & Misting Devices
  • Pyrotechnics
  • Live Capture

Bird Exclusion Methods

If the birds have nested in or around the facility, the next step would be to install bird exclusion products (birds have nested).

  • Bird Netting
  • Ledge Exclusion (AviAngle)
  • Architectural modifying structural
  • Aggressive Harvesting (Targeting)

Prevention Strategies

The best prevention strategy is planning and knowledge. Conduct a bird audit and develop a bird management plan before birds get near or inside the facility. The key is to act quickly, as soon as an incident occurs. I find countless times when I am called in to consult or service a food plant, that the birds got into the facility and no one knew what to do, and as a result, the birds remained within the facility for an extended period, thus increasing the risk of exposure. It is always much easier to remove a bird when they are unfamiliar with their surroundings. Whereas, it is much more difficult to remove birds from a facility that has had a long-standing bird problem.

Once you have a plan, who oversees the bird management plan? Are thresholds determined and set for various areas of the facility? For example, a zero threshold in production areas? Threshold levels will be set based upon by location and sensitivity of the said location. What steps are going to be taken to remove the bird? For how long is each step conducted? These questions need to be answered and developed to stay ahead of bird problems.

Reduce as many conducive conditions as possible. The longer a conducive condition stays active, the more likely birds, as well as other wildlife or rodents, will be attracted to the site and find a way into the facility.

Pathogen Contamination & Hazards

Birds present a host of problems, whether they are inside or outside of a facility. Birds can roost by air vents, and the accumulation of bird feces can enter the facility air system. Bird droppings on walkways and related areas allow for the possibility of vectoring of said dropping when employees step on droppings. Thus, spreading fecal matter/spores and other contaminants to areas throughout the facility.

If birds are within the facility, droppings can spread on product lines, raw materials, stored products, equipment and more, thus, causing contamination. Because of a bird’s ability to fly, they are perfect creatures to spread various diseases, pathogens, ectoparasites and fungal materials. Diseases such as Histoplasmosis, Salmonella, Encephalitis, E-coli, Listeria, and more. Birds have been known to transmit more than 60 infectious diseases!

Besides the spread of potentially harmful contaminants throughout the facility, bird droppings and nesting materials can also create a host of additional problems:

  • The acidity in bird droppings can damage building finishes, façade signs, lighting and more.
  • Wet bird droppings can create a slip and fall hazard.
  • Bird nesting materials can create a fire hazard around façade signs, exit signs and light fixtures.
  • Bird nesting and debris can clog roof drains and cause roof leaks from standing water.
  • Introduction of ectoparasites into the facility such as bird mites, lice, fleas, ticks and more.

Conclusion

In summary, taking a proactive approach to bird control is the best practice. Reduce food, water and shelter sources (aka conducive conditions) promptly. Pest management programs need to implement a more in-depth section of the program for bird control. Like integrated pest management, bird control should be based upon an integrated method. Each facility will have its unique challenges. As such, each bird management plan needs to be tailored to the specific site. A well designed and balanced, integrated bird management program will provide long-term and cost-efficient bird control.

The next article in this series takes a closer look at how to prepare an integrated bird management audit program.