Tag Archives: work environment

Shawna Wagner, DNV GL
FST Soapbox

Pandemics and Your Business Continuity Plan

By Shawna Wagner
2 Comments
Shawna Wagner, DNV GL

Who would have even thought to put the topic of a pandemic in your business continuity plan? I know, I sure never thought of it, even as a senior auditor. I think that most of us are familiar with the typical subjects of tornados, floods, power outages and disgruntled employees, to name a few. We now need to focus on adding a pandemic to the to-do list of your plan, as this global issue has become a reality since early 2020.

It is quite likely that your plant has been affected by COVID-19 in some way, therefore your site has put into place actions to mitigate the risks posed by the pandemic. What may not be likely, is that any of these actions have been documented. I have currently seen plants evolve actions based on the severity of the pandemic in their locations. Travel restrictions, reduced work force, changing employee personal protective equipment, additional employee monitoring, and remote work environments are some of the examples directly affecting sites that I have witnessed during the first half of this year. As plants learn and experience more issues, they tend to adapt to how they are mitigating the risks in their facilities.

Capturing what actions went smoothly and what has gone astray will aid in strengthening your business continuity plan. Pandemics as well as other extraordinary events are handled by a multi-step approach that needs organization and good communication. That is why it is imperative to build and document actions, then verify how those steps are to be used. Involving key personnel–not just the quality manager–at the site is a best practice in getting a full grasp on what needs to happen during an emergency. In several instances, I have witnessed that key personnel are not informed about where a site’s business continuity plan is located; or the plan was updated right before an audit and after goes back on the shelf for the next 12 months, collecting dust. Employees should be trained on the contents of the plan, their responsibilities (if they are part of the business continuity team), current contacts, updates, and ways to initiate proper channels, if or when a time comes to do so. Hopefully, it never does, but it sure does not hurt to be prepared.

The business continuity plan is not a “one-size-fits-all” approach for plants. An important consideration, when defining what actions to take, if your area has been plagued by a pandemic includes determining what risks are brought by employees, visitors (i.e., contractors), location, and type of product being produced. Plant A making a high-risk open product may implement additional hand washing and sanitation, whereas Plant B making a low-risk closed product may implement additional health screening (i.e., temperature checks) for employees. You should ensure that it makes sense, and it is beneficial for your site and your interested parties, such as customers, consumers and stakeholders.

Your business continuity plan should be built to be a great resource to you in the time of need. And in return, you will have to put some elbow grease into shaping the document in a way that fits the ever-changing food environment. Keeping your plant current will assist your business to quickly respond to a negative event. In consequence, not having a plan that works for your site, or any at all, could lead to closed doors.

Mike Edgett, Sage

COVID-19 Leads Food Companies and Meat Processors to Explore AI and Robotics, Emphasize Sanitation, and Work from Home

By Maria Fontanazza
No Comments
Mike Edgett, Sage

The coronavirus pandemic has turned so many aspects of businesses upside down; it is changing how companies approach and execute their strategy. The issue touches all aspects of business and operations, and in a brief Q&A with Food Safety Tech, Mike Edgett of Sage touches on just a few areas in which the future of food manufacturing looks different.

Food Safety Tech: How are food manufacturers and meat processors using AI and robotics to mitigate risks posed by COVID-19?

Mike Edgett: Many food manufacturers and meat processors have had to look to new technologies to account for the disruptions caused by the COVID-19 pandemic. While most of these measures have been vital in preventing further spread of the virus (or any virus/disease that may present itself in the future), they’ve also given many food manufacturers insight into how these technologies could have a longer-term impact on their operations.

For instance, the mindset that certain jobs needed to be manual have been reconsidered. Companies are embracing automation (e.g., the boning and chopping of meat in a meatpacking plant) to replace historically manual processes. While it may take a while for innovations like this to be incorporated fully, COVID-19 has certainly increased appetite amongst executives who are trying to avoid shutdowns and expedited the potential for future adoption.

FST: What sanitation procedures should be in place to minimize the spread of pathogens and viruses?

Edgett: In the post-COVID-19 era, manufacturers must expand their view of sanitation requirements. It is more than whether the processing equipment is clean. Companies must be diligent and critical of themselves at every juncture—especially when it comes to how staff and equipment are utilized.

While working from home wasn’t a common practice in the manufacturing industry prior to March 2020, it will be increasingly popular moving forward. Such a setup will allow for a less congested workplace, as well as more space and time for bolstered sanitation practices to take place. Now and in the future, third-party cleaning crews will be used onsite and for machinery on a daily basis, with many corporations also experimenting with new ways to maintain the highest cleanliness standards.

This includes the potential for UV sterilization (a tactic that is being experimented with across industries), new ways to sterilize airflow (which is particularly important in meatpacking plants, where stagnant air is the enemy) and the inclusion of robotics (which could be used overnight to avoid overlap with human employees). These all have the potential to minimize the spread of pathogens and, ultimately, all viruses that may arise.

Mike Edgett, Sage
Mike Edgett is an enterprise technology and process manufacturing expert with 20+ years leading business strategy for brands such as Infor, Quaker Oats and Bunge Foods. At Sage, he leads the U.S. product marketing team focused on the medium segment.

FST: How is the food industry adjusting to the remote working environment?

Edgett: While the pandemic has changed the ways businesses and employees work across most industries, F&B manufacturers did face some unique challenges in shifting to a remote working environment.

Manufacturing as a whole has always relied on the work of humans, overseeing systems, machinery and technology to finalize production—but COVID-19 has changed who and how many people can be present in a plant at once. Naturally, at the start of the pandemic, this meant that schedules and shifts had to be altered, and certain portions of managerial oversight had to be completed virtually.

Of course, with employee and consumer safety of paramount concern, cleaning crews and sanitation practices have taken precedent, and have been woven effectively and efficiently into altered schedules.

While workers that are essential to the manufacturing process have been continuing to work in many facilities, there will likely be expanded and extended work-from-home policies for other functions within the F&B manufacturing industry moving forward. This will result in companies needed to embrace technology that can support this work environment.

FST: Can you briefly explain how traceability is playing an even larger role during the pandemic?

Edgett: The importance of complete traceability for food manufacturers has never been greater. While traceability is by no means a new concept, COVID-19 has not only made it the number one purchasing decision for your customers, but [it is also] a vital public health consideration.

The good news is that much of the industry recognizes this. In fact, according to a survey conducted by Sage and IDC, manufacturing executives said a key goal of theirs is to achieve 100% traceability over production and supply chain, which serves as a large part of their holistic digital mission.

Traceability was already a critical concern for most manufacturers—especially those with a younger customer base. However, the current environment has shone an even greater spotlight on the importance of having a complete picture of not only where our food comes from—but [also] the facilities and machinery used in its production. Major budget allocations will surely be directed toward traceability over the next 5–10 years.